Industrial Grade 80g High Frequency Radar Level Sensor

• After-sales Service: 1 Year
• Principle: Reflection Principle
• Range: 0~120m
• Model NO.: ARLGS-02
• Measurement Accuracy: +/-1mm
• Accuracy: 0.1%
• Kind: Radar Level Gauge
• Structure: All in One
• Warranty: 1 Year
• Certification: CE, RoHS
• Product Name: Microwave Radar Level Meter
• Use Dielectric Constant Range: >=2
• Power Supply Range: 12~28.0VDC
• Signal Output: 4~20mA or RS-485
• Fault Output: 3.8mA ,4mA ,20mA ,21mA ,Keep
• Transport Package: Carton or Wooden Box
• Specification: 78X34X30 cm
• Trademark: AETCH
• Origin: Shaanxi, China
• HS Code: 9026100000
• Package Size: 78.00cm * 34.00cm * 30.00cm
• Package Gross Weight: 6.000kg

Product Description

Product Show

Based on self-developed CMOS millimeter wave radio frequency chip, it realizes a more compact radio frequency architecture, a higher signal-to-noise ratio, and a smaller blind area.
The 5 GHz working bandwidth enables the product to have higher measurement resolution and measurement accuracy.
The narrowest antenna beam angle is 3°, the interference in the installation environment has less impact on the instrument, and the installation is more convenient.
The wavelength is shorter, and it has better reflection characteristics on solid surfaces, so no special universal flange is needed for aiming.
 

Transmit frequency	76GHz~81GHz
Measuring range	0.3 m~ 60m   0 .08 m ~30m                     0.6 m~ 120m 0 .08 m ~ 10m
measurement accuracy	±1mm
Measurement interval	Fastest 100ms
Beam angle	3°/8°/20°
Use dielectric constant range	>=2
Power supply range	12~28.0VDC ,
communication method	MODBUS bus            HART
Signal output	4~20mA OR RS-485
Fault output	3.8mA ,4mA ,20mA ,21mA ,Keep
On-site operation/programming	128×64 dot matrix display/4 buttons Configurable upper computer setting software
Industrial temperature/humidity	T0:-40~85ºC/≤95%RH;T1:- 40~200ºC;T2:-40~500ºC;T3:- 40~1000ºC
shell material	Aluminum alloy, stainless steel
Process connection type	Pipe thread/universal flange/anti-corrosion flange/sanitary chuck/quartz isolation flange
Process pressure	-0.1~2MPa
Product Size	Ø100*270mm
Cable entry	M 20*1.5
Recommended cable	AWG18 or 0.75mm²
Protection level	IP67
Explosion-proof grade	ExdiaIICT6
Installation method	Thread or flange
Net weight/Gross weight	2.480Kg/2.995Kg
Packing box size	370*270*180mm

Application occasions:
1. Calcium carbide slag warehouse
2. Micronized slag powder silo of iron and steel plant
3. With stirring steam and beating tank
4. Mineral slurry
5. Gas tank
6. Spray paint, magnesium oxide
7. Lime slurry
8. Cement powder
9. Salt chemical industry small cone-shaped silo
10. Alumina powder
11. Steam reactor hydrolysis
12. Steam stirred reactor

Schematic diagram of normal temperature structure size of pipe thread process connection

Schematic diagram of the structure and size of the universal flange at room temperature

Schematic diagram of the structure and size of the sanitary chuck


Two points to pay attention to during installation: (1) Align the target material level and try to ensure the vertical incident material level; (2) Avoid false echoes. See the following points for typical working conditions.
Ensure that there are no interfering objects, such as human ladders and steps, within the beam range.

The installation of the instrument should ensure that the antenna beam avoids the feed inlet

The instrument is installed at least 20cm away from the container wall, otherwise it is likely to produce false readings

The cone-shaped container should try to ensure that the beam is directed at the bottom of the tank, otherwise the measurement results at the bottom of the tank may be inaccurate

Four-wire product wiring diagram

Two-wire product wiring diagram

Company Information

 

How to proceed an order?

1. Let us know your requirements or application.

2. We quote according to your requirements or our suggestions.

3. Customer places payment for formal order.

4. We arrange the production.

FAQ

1.Q: How long is the delivery?
-- Mostly within 10days

2.Q:Can I get a sample?
-- Sure, contact our sales please
 

3.Q:What is your MOQ?
-- 1pcs
 

4.Q: How about warranty time?
-- 12-18months
 

5.Q: How can I visit your factory?
-- Fly to Xi'an air port, it's our pleasure to pick you up.
 

6.Q:How do you control your quality ?
-- We have EPR system .we control from parts, process, testing, packing ,retesting.

 

7.Q: Do you have test report for each product?

-- Yes,we have test report for each product.

 

8.Q: Can you customize product for us according to our required specifications?

-- Yes,we are OEM manufacturer,we could customize products according to your required specifications.

 

Every Sensor will be tested two times before reach you, after that sport test for the third time. Make sure about the quantity.Welcome to order our products.